>> Our Products
 
CWD series horizontal lathe machine
 

Main funcutions:
These lathes can perform to turn end-faces,cylindricl surfaces and internal holes of various parts as well as metric,inch,module and pitch threads.The top slides can be operated individually by power for cutting short taper surface. Long taper surface can be turned automatically through the compound movement combining longitudinal feed with the top slide feed,moreover,the machines may be used for drilling,boring and trepanning.
They are characteristics of power,high spindle speed,high rigidity.The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloy tools.

SPECIFICATION

Model

CW61100D CW62100D

CW61125D CW62125D

CW61140D CW62140D

CW61160D CW62160D

Max.swing diameter over bed

1000mm

1250mm

1400mm

1600mm

Max.swing diameter over carriage

650mm

900mm

1030mm

1030mm

Max.swing diameter on gap

1500mm

1750mm

1900mm

2100mm

Width of bed

755mm

Max.length of workpiece

1000mm 1500mm 2000-12000mm

Max loading weight

6t

Spindle nose

A15130

Sindle bore diameter

130mm

Taper of spindle bore

Metric No.140#

Range of spindle speed

3.15-315r/min 21kinds 3.5-290r/min 12kinds

Spindle front bearing inner diameter

200mm

Longitudinal feeds range

0.1-12r/min 56 kinds

Transversal feeds range

0.05-6mm/r 56kinds

Rapid speed

Z-axis

3740mm/min

X-axis

1870mm/min

upper toolpost

935mm/min

Metrec threads range

1-120mm 44kinds

Inch threads range

3/8-28 TPI 31kinds

Module threads range

0.5-60mm 45kinds

Pitch threads range 

1-56TPI 25kinds

Taper of tailstock sleeve

Morse NO.80

Diameter of tailstock sleeve

160mm

Travel of tailstock sleeve

300mm

Main motor power

22kW

Rapid motor power

1.5kW

Coolant pump power

0.125kW

Stand Accessories

1. four-jaw chuck F 1000mm 1set 2. steady rest F70--480mm(for more than 2m) 1set 3. follow rest (for more than 2m) 1set 4. Morse 6# centers 1set 5. center sleeve 1set 6. tools 1set 7. foundation screws 1set

Special Accessories

1. steady restF 400--700mm 2. four-jaw chuck F 1250mm 3. Taper-turning device 4. Metric chasing dial device 5. Inch chasing dial device 6. Inch lead screw 7. T-type tool post

Hits:260  Input time:2016-3-6 【Print this page】 【Returns
 
  Copyright ©2014 Huayu Machinery Company All right reserved